<cite id="bmaqa"></cite>
  • <wbr id="bmaqa"><menu id="bmaqa"></menu></wbr>
  • <wbr id="bmaqa"></wbr><wbr id="bmaqa"><menuitem id="bmaqa"></menuitem></wbr>

  • Chinese Home
    Close

    Laike Hydraulics

    Fluid Solution Provider

    News

    Transition Connector Manufacturer Introduction Battery Lead Connector

    Transition connector manufacturers about battery lead connector, if the battery power is enough, in the broken joint made of clay battery connector mold, with a wire one end connected to the battery good electrode, the other end connected to a carbon rod, carbon dry battery positive pole is, can be obtained by dismantling waste batteries. When the carbon rod touches the damaged electrode, the carbon rod will heat up and melt the lead electrode. In this case, if the amount of lead is insufficient, some broken lead can be added. When the melted lead fills the mold space, the heating will stop. Transition joint manufacturers tell you if the battery power is insufficient, can not effectively on the lead electrode joint heating melting, can find a battery with sufficient power according to the above method, repair the electrode joint. Transition joint manufacturers tell you in the maintenance and inspection often pay attention to the height of the battery fluid, maintain between the upper and lower limits, if too much battery fluid is easy to overflow corrosion body, too little can not fully play the power. If there is white corroding powder, wash and wipe with hot water, and put on a layer of butter to reduce the degree of corrosion. Verify that the battery is strong. Try not to charge the battery after it has been drained, or it will reduce the battery life.


    Related news:


    The transition joint manufacturer teaches the user the difference between fast and loose joint


    Transition connector manufacturers know that the users who ask this question are all named by their surface


    Transition joint manufacturers popular rail frozen joint classification


    Transition joint manufacturers tell you the rail frozen joint classification: the opposite type of rail connection


    What is the expansion joint that transition joint manufacturer introduces


    The transition joint manufacturer tells the user that the expansion joint is also called the expansion joint, it is for compensation


    PREV: Hydraulic Joints Purchased By People Need These Performances In Structure.
    NEXT: NONE
    厨房激情邱淑芬,和单位哺乳少妇同事作爱,亲胸揉胸膜下刺激免费视频在线
    <cite id="bmaqa"></cite>
  • <wbr id="bmaqa"><menu id="bmaqa"></menu></wbr>
  • <wbr id="bmaqa"></wbr><wbr id="bmaqa"><menuitem id="bmaqa"></menuitem></wbr>